More actions
No edit summary |
No edit summary |
||
| Line 256: | Line 256: | ||
|bowharmonicserieslist | |bowharmonicserieslist | ||
|bhsl | |bhsl | ||
|[ | |[(set only) series]:[(set only) name]:[ratios] | ||
|Sets <u>all</u> ''ratios'' and the ''name'' of the ''harmonic list'' in the given '' | |Sets <u>all</u> ''ratios'' and the ''name'' of the ''harmonic list'' in the given ''series''. There can be any number of ''ratio''-parameters and this effectively sets the number of ''harmonics'' per octave. If required, empty ''harmonic lists'' will be added until ''slot'' is a valid number. On return, only returns ''ratios'' of the ''current harmonic list'' (takes no ''parameters'') | ||
|- | |||
|bowharmonicseriesratio | |||
|bhsr | |||
|[harmonic]:[ratio] | |||
|Sets the ''ratio'' of the given ''harmonic number'' in the ''current harmonic series''. Will increase the number of ratios in the series if needed | |||
|- | |||
|bowharmonicseriesratioremove | |||
|bhsrr | |||
|[ratio] | |||
|Removes the ''ratio'' given, will move all ''ratios'' with a higher ''harmonic number'' in the series. Cannot remove all ''ratios'' | |||
|- | |||
|bowharmonicseriescount | |||
|bhsc | |||
|none | |||
|Returns the number of ''harmonic series'' and their ''names'' in the format ''ratios:name1:name2 [etc]'' | |||
|- | |||
|bowharmonicseriessave | |||
|bhss | |||
|[name]:[series] | |||
|Saves the current ''harmonic series'' into the slot given by the second ''parameter'' with the name give in the first ''parameter''. Note that this ''command'' does <u>not</u> save it into flash memory | |||
|- | |||
|bowharmonicseriesremove | |||
|bhsrm | |||
|[series] | |||
|Removes the ''harmonic series'' given in the ''parameter''. Shifts all ''series''' with a higher ''series'' number | |||
|- | |||
|bowstatus | |||
|bs | |||
|none | |||
|Outputs debugging data. Deprecated | |||
|- | |||
|pickupstringfrequency | |||
|psf | |||
|none | |||
|Returns the fundamental frequency calculated from the current audio signal if, applicable | |||
|- | |||
|pickupaudiopeak | |||
|pap | |||
|none | |||
|Returns the peak amplitude of the current audio signal | |||
|- | |||
|pickupaudiorms | |||
|par | |||
|none | |||
|Returns the [[wikipedia:Root_mean_square|RMS]] amplitude of the current audio signal | |||
|- | |||
|bowdebugmeasuretimetotarget | |||
|bdmtt | |||
|[frequency] | |||
|Measure the time it takes to change from the current frequency to the target frequency, used to debug the ''PID'' | |||
|- | |||
|bowhome | |||
|bh | |||
|none | |||
|Homing bow, used at startup and in case of the bow loosing position | |||
|- | |||
|bowcalibrateall | |||
|bca | |||
|none | |||
|Performs all calibration routines for a single bow available in the given firmware | |||
|- | |||
|bowcalibratespeed | |||
|bcf | |||
|none | |||
|Performs a ''bowing speed calibration'' | |||
|- | |||
|bowcalibratepressure | |||
|bcp | |||
|none | |||
|Performs a ''pressure calibration'' | |||
|- | |||
|bowcalibratestablethreshold | |||
|bcst | |||
|none | |||
|Sets the ''stable threshold'' value used | |||
|} | |} | ||
a{{docnav | a{{docnav | ||