The Ekdahl FAR - Service: Difference between revisions

Line 14:

The easiest way to update the firmware is by installing [https://koromix.dev/tytools TyTools] and upload a [https://github.com/Knaster/EkdahlFar/tree/master/bin/Release binary] of the firmware using Teensy Commander.

Install TyTools as indicated on their website and [https://downgit.github.io/#/home?url=https://github.com/Knaster/EkdahlFar/refs/heads/master/bin/Release/EkdahlFarCB.hex download the latest binary .hex file]. After installing, start TyCommander, with the Ekdahl FAR plugged into one of the USB ports on your computer you should get a screen similar to this:

Install TyTools as indicated on their website and [https://downgit.github.io/#/home?url=https://github.com/Knaster/EkdahlFar/refs/heads/master/bin/Release/EkdahlFarCB.hex download the latest binary .hex file] and unzip it at your desired location. After installing, start TyCommander, with the Ekdahl FAR plugged into one of the USB ports on your computer you should get a screen similar to this:

[[File:TyCommander main.png|center|thumb|905x905px]]

With the Ekdahl FAR selected, press "upload" and direct the dialog to where you unzipped the .hex-file. Wait a few moments for the upload to complete, the instrument will restart and then you are good to go!

{{docnav

@@ Line 14: / Line 14: @@
 The easiest way to update the firmware is by installing [https://koromix.dev/tytools TyTools] and upload a [https://github.com/Knaster/EkdahlFar/tree/master/bin/Release binary] of the firmware using Teensy Commander.
-Install TyTools as indicated on their website and [https://downgit.github.io/#/home?url=https://github.com/Knaster/EkdahlFar/refs/heads/master/bin/Release/EkdahlFarCB.hex download the latest binary .hex file]. After installing, start TyCommander, with the Ekdahl FAR plugged into one of the USB ports on your computer you should get a screen similar to this:
+Install TyTools as indicated on their website and [https://downgit.github.io/#/home?url=https://github.com/Knaster/EkdahlFar/refs/heads/master/bin/Release/EkdahlFarCB.hex download the latest binary .hex file] and unzip it at your desired location. After installing, start TyCommander, with the Ekdahl FAR plugged into one of the USB ports on your computer you should get a screen similar to this:
+[[File:TyCommander main.png|center|thumb|905x905px]]
+With the Ekdahl FAR selected, press "upload" and direct the dialog to where you unzipped the .hex-file. Wait a few moments for the upload to complete, the instrument will restart and then you are good to go!
    {{docnav