More actions
No edit summary |
No edit summary |
||
| Line 434: | Line 434: | ||
|Sets the speed of the ''pressure motor'' in RPM when at ''engage'' and modulating the pressure. The main purpose of this setting is to avoid the ''bowing motor'' slowing down too much when modulating the ''pressure'', resulting in audible artifacts | |Sets the speed of the ''pressure motor'' in RPM when at ''engage'' and modulating the pressure. The main purpose of this setting is to avoid the ''bowing motor'' slowing down too much when modulating the ''pressure'', resulting in audible artifacts | ||
|- | |- | ||
| | |bowpressurehold | ||
|bph | |||
|<nowiki>[(0|1)]</nowiki> | |||
|Sets ''bow hold'' off or on. If ''bow hold'' is on, any ''bowpressurerest''-command will be ignored until ''bowpressurehold'' is set to off. Analog to the concept of ''infinite sustain'' | |||
|- | |||
|solenoid | |||
|so | |||
|[('0')] | |||
|Sets the ''current solenoid''. This command is intended for future versions of the Ekdahl FAR that may have more than one ''solenoid'' per ''string module.'' Currently '0' is the only valid ''parameter'' | |||
|- | |||
|solenoidengage | |||
|se | |||
|[force (0 - 65535)] | |||
|Engages the ''current solenoid'' with the ''force'' given, the ''force'' is mutiplied by the ''force multiplier'' as set by ''solenoidforcemultiplier''. The ''force'' is scaled according to the ''solenoidmaxforce'' and ''solenoidminforce'' parameters, a ''force'' of ''0'' always means to not engage. Also see ''solenoidengageduration'' | |||
|- | |||
|solenoiddisengage | |||
|sd | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Disengages the ''solenoid'' | |||
|- | |||
|solenoidmaxforce | |||
|sxf | |||
|[value (0 - 65535)] | |||
|Sets the maximum hardware force used | |||
|- | |||
|solenoidminforce | |||
|sif | |||
|[value (0 - 65535)] | |||
|Sets the minimum hardware force used | |||
|- | |||
|solenoidforcemultiplier | |||
|sfm | |||
|[value (0 - 1)] | |||
|Sets the value of the ''force multiplier'' | |||
|- | |||
|solenoidengageduration | |||
|sed | |||
|[duration (0 - 65535)] | |||
|Sets the duration of the ''solenoid engagement'' in ɥS. if a value of ''0'' is set the ''solenoid'' will not disengage until a ''solenoiddisengage-''command has been given. This latter behavior is <u>not encouraged</u> as it <u>'''can ruin the instrument if improperly used'''</u> | |||
|- | |||
|mutesetposition | |||
|msp | |||
|[position (0 - 65535)] | |||
|Sets the ''mute position'', scaled by the ''mutefullmuteposition'' and ''muterestposition'' | |||
|- | |||
|mutefullmute | |||
|mfm | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Sets the ''mute'' in the ''full mute position'' | |||
|- | |||
|mutehalfmute | |||
|mhm | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Sets the ''mute'' in the ''half mute position'' | |||
|- | |||
|muterest | |||
|mr | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Sets the ''mute'' in the ''mute rest position'' | |||
|- | |||
|mutesavefull | |||
|msf | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Sets the ''full mute position'' to be equal to the current ''mute position'' | |||
|- | |||
|mutesavehalf | |||
|msh | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Sets the ''half mute position'' to be equal to the current ''mute position'' | |||
|- | |||
|mutesaverest | |||
|msr | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Sets the ''mute rest position'' to be equal to the current ''mute position'' | |||
|- | |||
|mutefullmuteposition | |||
|mfmp | |||
|[value (0 - 65535)] | |||
|Sets the ''full mute position'' to ''value'' | |||
|- | |||
|mutehalfmuteposition | |||
|mhmp | |||
|[value (0 - 65535)] | |||
|Sets the ''half mute position'' to ''value'' | |||
|- | |||
|muterestposition | |||
|mrp | |||
|[value (0 - 65535)] | |||
|Sets the ''mute rest position'' to ''value'' | |||
|- | |||
|mutesustain | |||
|ms | |||
|<nowiki>[conditional (0|1)]</nowiki> | |||
|Sets the ''mute sustain'' to ''off'' or ''on''. When ''mute sustain'' is ''on'', any ''mutefullmute-''commands sent will be ignored until ''mute sustain'' is set to ''off'' | |||
|- | |||
|mutebackoff | |||
|mbo | |||
|[backoff (0 - 65535)] | |||
|Sets the ''mute backoff'' to ''backoff'', given in mS. The ''mute backoff'' sets the time that the ''mute'' stays in the ''mutefullmute'' position before automatically going to the ''rest position'' | |||
|- | |||
|mutehome | |||
|mh | |||
|none | |||
|Homing the ''mute'' | |||
|- | |||
|mutecalibrate | |||
|mca | |||
|none | |||
|Runs the ''mute calibration'' | |||
|- | |||
|bowactuatoradd | |||
|baa | |||
|none | |||
|Add new bow ''actuator'' | |||
|- | |||
|bowacutatorremove | |||
|bar | |||
|[actuator] | |||
|Removes the ''actuator'' given in the ''parameter'' | |||
|- | |||
|bowactuatorset | |||
|bas | |||
|[actuator] | |||
|Sets the ''current actuator'' to the number given in the ''parameter'' | |||
|- | |||
|bowactuatorload | |||
|bal | |||
|none | |||
|Loads data from the ''current actuator'' | |||
|- | |||
|bowactuatorsave | |||
|bas | |||
|none | |||
|Saves the ''bow pressure position rest, bow pressure position engage'' and ''bow pressure position max'' into the ''current actuator'' | |||
|- | |||
|bowactuatordata | |||
|bad | |||
|[actuator]:[engage]:[max]:[rest]:[name] | |||
|Sets the ''bow pressure position engage, bow pressure position max, bow pressure position rest'' and ''actuator name'' of the ''actuator'' given by the first ''parameter'' | |||
|- | |||
|bowactuatorcount | |||
|bac | |||
|none | |||
|Returns the number of saved ''actuators'' | |||
|- | |||
|s | |||
| | | | ||
| | | | ||